Environment humidity 0～95%RH Sensor performance parameters

1,Product introduction

Paste the sensor as follows:
1) Pick up the sensor with both hands and align it with the installation position;
2) Hold the front part of the sensor all the time, and press the rear part of the sensor hard;
3) Release the front end of the sensor and press the front end hard to squeeze out the internal ergo glue;
4) Fix the front and back of the sensor with tape;
5) Wait about 13 minutes, the color of ergo glue will change from blue to dark green. Press down on the ergo glue next to the sensor and remove the tape if it is already very hard and no longer sticking to the glove. If it is still soft, you need to continue to wait until it becomes very hard;
6) After the installation is completed, sika521uv glue needs to be applied around the ergo glue, and there can be no exposed ergo glue.

2,Features

① Simple installation and easy maintenance
② High precision
③ Flexible and portable
④ Data is safe and reliable

3,Application field

① Blade root load measurement
② Independent pitch
③ Blade derating
④ Fatigue monitoring
⑤ Fan control

4,Performance Parameter

5,External interface of demodulator

LAN: network interface, which can be used for the connection of the device network; the network cable can be connected to the computer, and the device parameter setting, status observation and data transmission can be performed through the device client software.
CANopen: CAN interface, which transmits data externally through the CANopen protocol.
POWER: Power interface, which supplies power to the whole device.
1-16: Sensor interface, used to connect with different fiber grating sensors (the number of channels is customized according to customer requirements).
FIELDBUS: DB9 interface, supports external data transmission through Profibus, RS485, etc.

MOVELASER

Nanjing Movelaser Co., Ltd., established in 2015, is a leading innovator in the development and application of coherent wind LiDAR systems. We have introduced a range of dynamic wind LiDAR products, including ground-based, nacelle-mounted, and 3D scanning systems. Our products have achieved CE and ETL certifications, and their performance parameters have been validated by renowned wind energy assessment organizations such as DNV-GL, Windguard, DTU Risø , and the China Meteorological Administration. We have actively participated in international IEC and domestic wind industry standard-setting initiatives.

With a team of over 300 employees, including more than 100 technical professionals, we have obtained more than 100 core intellectual property rights and achieved breakthroughs in key technologies such as high-energy all-fiber single-frequency lasers, micro-nano weak signal detection, high-speed data processing and accurate inversion algorithms, and robust system control. We possess end-to-end capabilities for complex optoelectronic system development, including research, engineering, manufacturing, and testing.

Our achievements have been recognized through various honors and qualifications, including being designated as a national high-tech enterprise, a national specialized and new "Little Giant" enterprise, a national intellectual property advantageous enterprise, a potential unicorn enterprise in the southern Jiangsu region, a demonstration enterprise for transformin.